So, this is our front porch now.
We decided that since we have so much work planned for the house we might as well pay the extra money to have a dumpster that is emptied each week. Thank goodness we made that choice! What you see on our front porch is what is left after the dumpster was filled with a whole bunch of carpet. So, once the dumpster is emptied, we can fill it again with the stuff on the front porch. Unfortunately, we still have plenty more to tear up in the house. Oh well, we'll get rid of it week by week.
As you can imagine, all of this demolition is creating quite a mess. The carpet had plenty of dust in it, but the big culprit is the tile and it's concrete backer board. Andy chiseled up the tiles and then pulverized and tore up the concrete backer board that was under the tile. He had hoped that the backer board could remain down with the laminate laid on top of it. Several flooring people at the big box stores said that was probably the best way to do it even. But of course, that wasn't what I wanted because then the entry and our breakfast nook (the two places with the tile being removed) would sit about an inch above the rest of the flooring. YUCK!
Here's another picture of the layer of dust that is coating much of our house currently.
We have one "clean room" downstairs. Even with the plastic on one side and curtains on the inside, some of the dust still made it through.
Andy learned that the recommendation to use a sledge hammer to demolish concrete backer board should be followed. If you use a wood splitter rather than a sledge hammer, you might have a little too much force. You might go through the concrete backer board (including the metal mesh in the middle of it) on down to the plywood subfloor. Since it is not advisable to have big holes in your subfloor, you would have to cut out and replace the subfloor in those areas.
